Hallo,
yesterday I installed maps 3.0 on my N82. So I
Hallo,
yesterday I installed maps 3.0 on my N82. So I
When you update from NM2 to NM3 some info can be left in the "qf" file and the "cities" folder from the NM2 version of the application. The solution to this problem is to delete the "cities" folder and the "qf" file and restart NM3 on your phone. You will now have a clean version of the "qf" file and "cities" folder on your phone, but no map data or voice files. You now need to connect your phone to your PC and run Nokia Map Loader 3 (NB// Remeber that if you had Nokia Map Loader 2 on your PC you need to uninstall this before you install Nokia Map Loader 3 or Nokia Map Loader 2 will remain on your PC and Nokia Map Loader 3 will not have installed).
If this does not work you may need to re-run Nokia Map Updater again.
mbrett
N95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
thank you mbrett, but it didn
Assuming from your response that you have already deleted the "qf" file and "cities" folder, started NM3 allowing it to fully start, stoped NM3 and re-installed map data and voice files using NML 3.
Start NM3 on your phone.
Go to Tools / Settings / Navigation / Voice Guidance
select the language file you downloaded. It can be a little slow. It may even want to download OTA.
mbrett
N95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
I know that is a stupid thing, but have you checked the sound level that is not a zero?
Navio
Nokia E66-1 (218.04) FW 200.21.118
Nokia N95(01.01) V 31.0.017 RM 159
yes, I checked the sound level and in this moment I deleted all the data again. I will reinstall the maps and the voicefile with stoped !!! NM3.
We will see. :-)
If I understood well you are using your phone in german language.
Could you try to use your phone in english language? install everything and try again. I am not sure that it is the right solution...
Navio
Nokia E66-1 (218.04) FW 200.21.118
Nokia N95(01.01) V 31.0.017 RM 159
Another stupid suggestion: There is no sound unless you have paid for voice guidance license (or got the licence for free) and installed the license.
Markus
(E66-1(03), 210.21.007, Maps 3, v3.0 09wk03 b02 MW OpenGL LM MN, Map version 0.1.18.0)
I have Nokia E71-1 (RM-346) with firmware version 210.21.006 "Latest firmware" & I did all the steps trying to make the sound work but no success.
I have already NM2 license installed, phone language is English , I even format memory card & uploaded the new MAP & voice guides
Navigation is working fine but without sound.
Good evening everybody. Thank you for your helpfull hints. Now I found out, that all the soundfiles work properly if I start them with the datamanager inside my mobile.
So I suppose, that NM3 can not find the correct data.
Please can you look in your directories for the correct path to the sound-files.
My settings are: N82\Speicherkarte\cities\diskcache\voices\german_f\german_female
It is also possible, that Navio had a good idea and NM3 doesn
also the english voicefile was no solution :-(
When I wrote to use the phone in english, it was to set the whole interface of phone in english, not the voice files.
I am using a E66, I always used it in english language. the voice guidance is italian.
This the path where there is the voice:
Nokia Phone Browser\E66\Memory Card\CITIES\diskcache\voices\italian_f\italian_female
This is my QF file, I hope that I will help you.
format:QF
client_id:s60Maps3.0
voice_mode:Viking
quota:1337446891
diskcache:cities\diskcache
voicefiles:cities\diskcache\voices
cachedats:cities
languageID:27
ttffiles:
build:v3.0 09wk03 b02 MW OpenGL LM MN
client_version:1.3.15.0
Navio
Nokia E66-1 (218.04) FW 200.21.118
Hi Navio,
thank you for your effort. I did all the recommended settings again. But I have no sucess. All the soundfiles are reachable and I can start and hear them all by hand.
I think, I will downgrade to NM2 wihin the next days or weeks and wait for the official version of NM3.
Thank you all and a nice evening
Werner
I vaguely remember that I had a similar problem when changing to NM3. If I remember correctly the problem appeared when I had loaded several voices. NM3 worked OK, if you had one or two voice alternatives but many voices caused trouble. You might try to delete all voices except one or two.
Markus
(E66-1(03), 210.21.007, Maps 3, v3.0 09wk03 b02 MW OpenGL LM MN, Map version 0.1.18.0)
Hi Markus,
I
rockamstock: Please can you post the content of your qf-file ...
My qf-file (I too have two copies of it):
format:QF
client_id:s60Maps3.0
voice_mode:Viking
quota:1610376806
diskcache:cities\diskcache
voicefiles:\cities\diskcache\voices
cachedats:cities
languageID:9 (<- I suppose this is index number to "Finnish male". My phone gives the list of languages in Finnish, so "suomi" is not number 9, but probably "Finnish" is no 9 0n English list)
ttfiles:
build:v3.0 09wk03 b02 MW OpenGTL LM MN
client_version:1.3.15.0
In the voices-directory there are two subdirectories
finnish_f
finnish_m
and a file
voice_catalog.FIN
contents of the dikcache-directory
0, 1, 2, ..., 9, a, b, c, ClientIndex, d, e, f, icons, safetyspots, voices, 0.0.0.0.tmcinfo.cdt, 0.0.0.0.tmcquant.cdt, CachedatHeader.cdt, config.cfg, ffffffff.cdt, qf, srand
regards
Markus
(E66-1(03), 210.21.007, Maps 3, v3.0 09wk03 b02 MW OpenGL LM MN, Map version 0.1.18.0)
Good evening Markus,
this is my qf-file
format:QF
client_id:s60Maps3.0
voice_mode:Viking
quota:1405042688
diskcache:cities\diskcache
voicefiles:cities\diskcache\voices
cachedats:cities
languageID:3
ttffiles:
build:v3.0 09wk03 b02 MW OpenGL LM MN
client_version:1.3.15.0
I
Hi everybody !
You
How can the perceived final release for Nokia Maps 3 be next month when on Betalabs it is still listed as "Early Release". The software should progress through the stages to "Stable" before final release. This is not to mention the number of bugs poepple have found and the fact that the app has only had two beta releases so far. The first being december and the second being february (incorporating FP1 devices).
mbrett
N95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
..no sounds + no 3D landmarks either. In the beginning it was working fine, but suddenly it did not download the 3D images anymore. Also the sound was gone. I have tried everything, but nothing helps. Art
I have a working configuration with Finnish male and female voices. I tried to add English. It seemed to load OK, but I got no sound. After trying a few tricks I noticed that I had lost my Finnish voices too. I was not able to recover any voices except by reloading a full backup that I had made before.
Markus
(E66-1(03), 210.21.007, Maps 3, v3.0 09wk03 b02 MW OpenGL LM MN, Map version 0.1.18.0)
wish you all a nice Sunday afternoon,
regarding the "no sound"-trouble I wrote an email here http://ssbeta.yav4.com/Maps/ to the betalab-team and I showed them our thread. Perhaps we will get an answer. In this case I will post the news here.
Thank you all for your informations.
Werner
Hi again !
That
Hi all,
Thanks for the comments and sorry that you are having issues. I will forward this to the team and hope to come back with an update very shortly.
Thanks,
Kee
Maps Team
Hi kee,
thank you for this contribution. We all know, that we installed a beta-version. So I
just for info:
Same problem on N96! Installed Maps3.0 deleted old Folder and File, redownload the Maps and Voices!
Still no voice at navigation. Tried everything postet here with no sucess. I realy looking forward to a patch because i become likly with maps3.0!
I face the same problem with the Danish Voice file on my Nokia N95 8gB
Same problem for me on an N95 and with Swedish voices.
Hi everyone
I have an n95 8gb on the UK vodafone network and keep getting problems on my phone. By reading all the information about the updated firmware from nokia over the months I am thinking of unbranding my mobile, so I can use the newest nokia update, as vodafone no longer supplying any further firmware (20.0.016 currently).
I use nokia maps 3 nearly every day at the moment, so rely on it lots. By reading this forum, it looks like quite a few, if not everyone who installs this at this time are having problems wityh sound. When I first installed I had sound problems and mbrett informed me which files to delete (mentioned above) and what to install using NML3 and everything worked fine.
To be honest, I thought the next update would have been here long before now, so people can inform them of any further problems that may have been missed. Hopefully it's another beta in June, as people seem to be getting sick of waiting for bug fixes. Updates however small on a regular basis would be better than waiting months. It's starting to look like the maps team means 1 or 2 people struggling and poor Kee is getting an ear bashing at times (Kee is trying to help, but it's if the maps team are listening to him).
I think I will wait and see if the updated version comes out in June.
Big thanks to Kee and Mbrett for all the help and advice they are giving everyone on the forum.
Ish68 - UK Vodafone -- N95 8Gb -- (20.0.016)
Excuse-me my english is bad.
My Maps 3 works vey well for 3 months.
In using an error occurs in accessing the memory card.
An message say that is was using the cell memory.
After that no was sound in Maps 3 guidance.
I try all, reset, reinstall, ..... downdgrade, upgrade, but still no working.
I reinstall the portuguese (Brasil) voice several times, but I have an impression (many times)that the download no works corretly or/and in writing the informations to the cell.. Is the files corrupted on Nokia site?
Thanks,
S
Excuse-me my english is bad.
My Maps 3 works vey well for 3 months, and works very well, and Maps 3 is superb!.
In using an error occurs in accessing the memory card.
An message say it was using the cell memory. I reply, yes.
After that there is no sound in Maps 3 guidance.
I try all, reset, reinstall, ..... downdgrade, upgrade, but still no working.
I reinstall the portuguese (Brasil) voice several times, but I have an impression (many times) that the download no works corretly or/and in writing the informations to the cell, was a problem. Is the files corrupted on Nokia site?
A tip: the problem initiate after I try to reinstall to fix the problem of access to the memory card.
Thanks,
S
Hi
mbrett might have an idea on this (hope you don't mind me suggesting you mbrett).
I was getting load of problems with my n95 8Gb crashing, mainly when using NM3 and I could not do any video's using the camera and mbrett suggested I backed up my info and format the 8gb internal memory.
After I done this NM3 worked fine and so did the video side of things. But after looking at the forum, it looks like people are having problems, I think the maps team are looking into this and also into the plug-in problems.
Hopefully this will be sorted soon, but the maps team needs to let us know more, even if it's a small section on the home-page.
Ish68 - UK Vodafone -- N95 8Gb -- (20.0.016)
Hi all.
Apologies for the delayed issue. I have confirmed that this is a known issue and will be resolved very shortly (alongside an updated release of Maps 3.0).
As soon as I have confirmed the release of this I will announce onto the forum.
Sorry for the inconvenience.
Regards,
Kee
Maps Team
Installed Maps 3 on my Nokia 6210 navigator but unfortunately I have the same experiences as the others.
No sound.
Using the Dutch female voice or English female voice.
Did all the suggestions as removing the qf-file and so on, but without any result.
Looking forward to your updated version.
The graphics are superb!
I have same problem for me on an N96 with Spanish voices.
Maps team say they have confirmed that this is a known issue and will be resolved very shortly (alongside an updated release of Maps 3.0).
Hopefully this will be sorted soon
Thanks
I closed the duplicate found here:
http://betalabs.nokia.com/forum/topic/2768
Thanks mbrett for flagging yet another one and helping to keep the forums clean!
It worked fine in the beginning, now the voices are gone.
But anyway this is great application, just waiting the new release.
N85, Happy Owner
hi,
same on my E90 no sounds with actual beta-release
(Maps Updater BETA 10)
Regards from Hamburg!
Karl - E90 (RA-6) 300.34.84
If Maps team say they have confirmed that this is a known issue and will be resolved very shortly, When updated next release of Maps 3.0?. I think this bugreport is very important!.
Regards and thanks
i have the same problem with my E71
it was working fine 1st but then :(
Hi Kee,
could you please give us an info when there will come an update?
Regards
The sound is back with yesterdays update, thanks!
guys its working again with my E71
i was fooling arround my pc and i found that before the sound disappeared i copied all my content of my memory card to the pc,including the cities folder and the qf file.
so i deleted them from my cellfone and copied the old ones back i had on the pc and the sound guidence was working again.
so i compaired the files before and after and the only difference was both old folders on the pc(cities and qf)were in capital leters.
so as silly as it may seems try guys to rename both folders in ur cellfone and make the name capitalized and see if it works.
@wildalan: Now you just need to try out the new version.
Released yesterday.
BTW// I'm running the new version and both the cities folder and qf file are in lower case (according to file manager on the phone). I have voice, but there again I still had voice on my old version.
mbrett
N95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
I also just like to join the choir of exited users of the update. As a truckdriver delivering foodstuff to farmers in Denmark I have tested the new installation today, and I'm still amazed. The routeplanning is accurate end the Danish Female Voice is nice to hear guiding me around on the different routes, so I see no problem in prolonging the licence - if we can expect the same stability on the coming N97 as on my current N95-8Gb
I found thi over the internet it is not mine but it works. it was written by someone named "tzar"
try this:
1- Go inside VOICES folder for any voice yuo want to use
2.-delete file: common.lua (if u want you can just add ".bak" so you don't lose it)
3.-open file "config.lua" with notepad or similar (again if u want u can do a backup of this file)
4.-find the line containing "requieres("common") and delete it.
5.-three lines below there's a line that says "get_common_code()" find it
6.-REPLACE the text "get_common_code()" with ALL the text below this: (use copy paste if u want)
START COPYING FROM HERE (below this line)
if trigger == "GPS_SIGNAL_LOST" or trigger == "GPS_SIGNAL_RESTORED" or trigger == "NO_GPS_SIGNAL" or trigger == "ROUTE_RECALCULATION" then
process_gps_triggers()
end
if trigger == "COMMAND" or trigger == "REMINDER1" or trigger == "REMINDER2" or trigger =="ANNOUNCEMENT" then
process_maneuver_triggers()
end
if trigger == "SAFETYSPOT_WARNER" then
if above_speed_limit == true then
table.insert(result_list, misc[ "safety_camara_ahead_wav" ] )
else
table.insert(result_list, misc[ "beep_sound" ] )
end
end
if trigger == "SPEED_WARNER" then
table.insert(result_list, misc[ "over_speed_limit_wav" ] )
end
if trigger == "TRAFFIC_WARNER" then
if avoidance_mode == "AUTOMATIC_AVOIDANCE" then
table.insert(result_list, misc[ "traffic_automatic_detour_wav" ] )
elseif avoidance_mode == "MANUAL_AVOIDANCE" then
table.insert(result_list, misc[ "traffic_manual_detour_wav" ] )
else
table.insert(result_list, misc[ "beep_sound" ] )
end
end
if trigger == "PEDESTRIAN_COMMAND" then
if maneuver_1.id == "STOPOVER" then
table.insert(result_list, misc[ "stopover_wav" ] )
elseif maneuver_1.id == "END" then
table.insert(result_list, misc[ "destination_wav" ] )
else
table.insert(result_list, misc[ "beep_sound" ] )
end
end
STOP COPYING HERE (above this line).
save the file remember it's "config.lua" (notepad will add .txt erase it)
hope it helps
Hey all,
Hope someone can help with this. I've been searching high & low on all the forums and blogs that I can find to try and fix this. I just got a new Nokia e71x (AT&T) and installed Ovi Maps for all the US and the Voice files. I purchased a 1yr Navigation from Nokia and the turn by turn works but the sound for voice guidance seems to be muted. When i am close to a turn or destination, I can see a red box flashing like it's saying something and if I try to turn the volume up the bars are red. I know the e71x is not supposed to be supported for the free maps, I but found info here (http://janetalkstech.com/installing-nokia-maps-3-0-1-on-the-nokia-e71x) on how to install it. I am using the Nokia_Maps_3.0_0302_3.2_u.sis which is actually for the Nokia 6650.
Jane also had a link to here (this post by IKTUS) that another e71x owner (bobe71x) used to fix the sound on his phone but I tried it and it didn't work on mine. I have the latest firmware v3.28 on the phone and have tried to re-install the .sis file to no avail. There must be some code somewhere that AT&T put in to make it mute, or possibly the AT&T nav app is conflicting? Any help would be great. Thanks.
I am unable to restore Voice Guidance on my N97 mini after manually installing the maps and voice files,reinstalled Ovi Maps on my mobile, restored from backup. I even reinstalled the device software. I thought restoring the settings and apps from backupwill work but it has not. I still do not get a sound while driving. It shows the map accurately though. I wanna hear the driving guide back.