Hey,
I tested few data access point selection apps (devicescape, wefi, etc) but all of them seem to do the same... they only choose the wi-fi access... I want to setup on my applications a single access point and let the software devide which one to use following a priority list configured by me.
For example, lets suppose I configure this general access point with the following priority:
1- Wi-Fi (the strongest signal available that exists on my access point list)
2- 3G data package
When I try to access the web it will first look for an wi-fi signal and, if it could not find it would use the 3G access.
Another option would be...
1- home wi-fi
2- neighbour wi-fi
3- the strongest wi-fi signal available that exists on my access point list
4- Easy-wifi (devicescape access point)
5- 3G data package
This way I set my home and my neighbour with a higher priority over the other wi-fi networks or any devicescape public wi-fi, no matter if their signal is stronger or not.
This would be good to avoid being changing the access point if you are at home or on the streets (without wifi connection).
What do you think?
Andre.